bash guard

[sich0015]

I just put on my new e 13 and of course I removed my third chainring first. Is there something I can do to change my shifter from 3 to 2 speeds without buying a different one? I guess at this point I will just hope I don't accidentally shift up to the old large ring.

[dvo1]

You screw in the adjuster screw to limit it from shifting to the top ring.

[soupboy]

You can do what Dan says or you can do nothing at all. There is nothing to shift *up* to and unless something is set up horribly wrong you'll just push the chain into the inboard side of the basher. No harm...no foul.

[charliebrown]

What Dan said, it is so easy even I can do it.

[Danimal]

I did my own as well. Just turn those little screws til you figure it out. Took me about 6 minutes to figure out which adjuster screw limited which side of the chainring.

[soupboy]

For the record, there should be no *issue* shifting into the no longer present "big ring". There is no need to adjust anything. Install the basher and keep on riding. If you *really* want to tweak it, great, but it is not necessary.

[wokerhopper]

Just so everyone knows, turn the screw with the H labeled on it, high limit, until it doesn't go up there anymore. I would also guess that the bash guard sits a little higher than the original third ring so it probably wouldn't be wise to shift into that too many times.