[defective]
01-20-2008, 03:03 PM
PRICE: $1200
http://farm3.static.flickr.com/2144/2206377395_0a31031e4a.jpg
The Backstory: I'd been wanting to update my beloved V-only/SS-only 2005 Inbred to a 1x9 disc, so I bought myself a new Winter trail bike as a Christmas present to myself. I fell for the new red slot dropout Inbred, and since On-One doesn't sell the red as a complete, I bought a bare frame and customized a build kit for myself.
The day after my new ride arrived, and before I built it up, I found a Pugsley I couldn't pass up. This made my beautiful new Inbred is 80% redundant for my purposes. Beyond this, I made some modifications to to an existing Azonic Steelhead I have, and now the new Inbred is 95% redundant. It's paining me to unload it, but I can't afford two new bikes.
I'm hoping to sell.
16" Inbred
http://www.on-one.co.uk/page215.html
Suggested Height 5'6"-5'10" Inseam 28"-31"
- It's completely brand new and unridden.
- Framesaver applied and prepped.
- A red 16" Inbred built complete with Bontrager Switchblade Race forks.
- The steerer is only partially cut down to leave a lot of room to play with before the final stem height decision is made. Supposedly, you also have the option to put a 29 up front with these forks. Try a 69er?
US Distributor: http://www.zedsport.com/pages/mountain/onone/inbred.htm
Bontrager Switchblade Race
http://www.bontrager.com/Mountain/Components/Forks/22061.php
Thomson Elite Stem
Cane Creek S2 Threadless Headset
Sette Duo Handlebar
Race Face Evolve Single Speed Crankset
SRAM X.7 Trigger Shifter 9 Speed
SRAM X.7 Rear Derailleur
SRAM PG 970 11-34 Cassette
SRAM PC 971 Chain
N-Gear Jump Stop
Avid Speed Dial 7 Levers
AVID BB7 Disc Brakes
Rhyno Lites Black laced to Deore hubs w/ black spokes
*IRC Mythos XC Racing Kevlar
*Sette IXA Chromoly Rail Saddle
Ritchey Comp Seatpost
*(Not shown in photos.)
PRICE: $1200
That's a good deal less than you could have someone build this for.
Please note, there are a couple of differences between the photos and what I'll be selling.
Pedals not included.
The photos show a Timberwolf 2.7/2.5 pair mounted. I won't be selling them with the bike. I just wanted to show that they'd fit nicely. The bike will be sold with a new pair of IRC Mythos XC Racing Kevlar tires, as listed above.
A used but good condition pair of Timberwolf 2.5 tires is available.
A slightly used pair of Maxxis Larsen TTs 2.3 is also available.
Finally, I just realized I have a different saddle mounted that what I'll be selling. Pictured is a used WTB Speed V. Sold will be the Sette saddle listed above.
Please PM with questions. More photos available.
I live in south Minneapolis and work in Eden Prairie.
Thanks for looking.
Scott
http://farm3.static.flickr.com/2263/2207168356_641563053e.jpg
http://farm3.static.flickr.com/2218/2206378049_00f3fb71c2.jpg
http://farm3.static.flickr.com/2323/2206378551_66ecd5d30f.jpg
http://farm3.static.flickr.com/2296/2206378475_8d32c80a26.jpg
http://farm3.static.flickr.com/2024/2207167998_d94f221e02.jpg
http://farm3.static.flickr.com/2054/2207167916_4d86b9b6e7.jpg
http://farm3.static.flickr.com/2144/2206377395_0a31031e4a.jpg
The Backstory: I'd been wanting to update my beloved V-only/SS-only 2005 Inbred to a 1x9 disc, so I bought myself a new Winter trail bike as a Christmas present to myself. I fell for the new red slot dropout Inbred, and since On-One doesn't sell the red as a complete, I bought a bare frame and customized a build kit for myself.
The day after my new ride arrived, and before I built it up, I found a Pugsley I couldn't pass up. This made my beautiful new Inbred is 80% redundant for my purposes. Beyond this, I made some modifications to to an existing Azonic Steelhead I have, and now the new Inbred is 95% redundant. It's paining me to unload it, but I can't afford two new bikes.
I'm hoping to sell.
16" Inbred
http://www.on-one.co.uk/page215.html
Suggested Height 5'6"-5'10" Inseam 28"-31"
- It's completely brand new and unridden.
- Framesaver applied and prepped.
- A red 16" Inbred built complete with Bontrager Switchblade Race forks.
- The steerer is only partially cut down to leave a lot of room to play with before the final stem height decision is made. Supposedly, you also have the option to put a 29 up front with these forks. Try a 69er?
US Distributor: http://www.zedsport.com/pages/mountain/onone/inbred.htm
Bontrager Switchblade Race
http://www.bontrager.com/Mountain/Components/Forks/22061.php
Thomson Elite Stem
Cane Creek S2 Threadless Headset
Sette Duo Handlebar
Race Face Evolve Single Speed Crankset
SRAM X.7 Trigger Shifter 9 Speed
SRAM X.7 Rear Derailleur
SRAM PG 970 11-34 Cassette
SRAM PC 971 Chain
N-Gear Jump Stop
Avid Speed Dial 7 Levers
AVID BB7 Disc Brakes
Rhyno Lites Black laced to Deore hubs w/ black spokes
*IRC Mythos XC Racing Kevlar
*Sette IXA Chromoly Rail Saddle
Ritchey Comp Seatpost
*(Not shown in photos.)
PRICE: $1200
That's a good deal less than you could have someone build this for.
Please note, there are a couple of differences between the photos and what I'll be selling.
Pedals not included.
The photos show a Timberwolf 2.7/2.5 pair mounted. I won't be selling them with the bike. I just wanted to show that they'd fit nicely. The bike will be sold with a new pair of IRC Mythos XC Racing Kevlar tires, as listed above.
A used but good condition pair of Timberwolf 2.5 tires is available.
A slightly used pair of Maxxis Larsen TTs 2.3 is also available.
Finally, I just realized I have a different saddle mounted that what I'll be selling. Pictured is a used WTB Speed V. Sold will be the Sette saddle listed above.
Please PM with questions. More photos available.
I live in south Minneapolis and work in Eden Prairie.
Thanks for looking.
Scott
http://farm3.static.flickr.com/2263/2207168356_641563053e.jpg
http://farm3.static.flickr.com/2218/2206378049_00f3fb71c2.jpg
http://farm3.static.flickr.com/2323/2206378551_66ecd5d30f.jpg
http://farm3.static.flickr.com/2296/2206378475_8d32c80a26.jpg
http://farm3.static.flickr.com/2024/2207167998_d94f221e02.jpg
http://farm3.static.flickr.com/2054/2207167916_4d86b9b6e7.jpg