truvativ HUSSELFELT

[aclg]

ok so now im up to the cranks,
im looking at the truvativ hussfelts, as i downhill and XC with 118mm splined bb
will this fit on my 68mm k2 flying monkey? im always at a loss with matching up this particular component. Does the lenght matter so much and are they pretty universal in terms of width? The K2 has threaded bb tube, will this work with the isis that comes with these hussfelts? this is tough stuff.

mike thanks for the advice on the z4 rebuild, went off (so far) without a hitch, now working my way back up to rebuild but missing just the oil.

ac

[Buck]

ok so now im up to the cranks,
im looking at the truvativ hussfelts, as i downhill and XC with 118mm splined bb
will this fit on my 68mm k2 flying monkey? im always at a loss with matching up this particular component. Does the lenght matter so much and are they pretty universal in terms of width? The K2 has threaded bb tube, will this work with the isis that comes with these hussfelts? this is tough stuff.

mike thanks for the advice on the z4 rebuild, went off (so far) without a hitch, now working my way back up to rebuild but missing just the oil.

ac
Yes the hussfelts are ISIS and will work on the K2. The BB should fit no problem. Just order one for the shell size and spindle length you need. I'd go to www.truvativ.com (http://www.truvativ.com) figure out exactly what you need. Lets see some pictures!!! You like hussfelts...pretty solid!
L8R
Buck

[danger!]

I've got a brand new set of Hussefelt's in 175mm if you're interested. They were a replacement for some that got damaged in shipping on a bike I used to own, and I don't think I'll use them anytime soon on a bike. I just don't have a need for that much beef right now.

-Dan

[Magic]

Hey Dan, what are those cranks worth to ya. Maybe a little trade and some cash for my trueing stand. I'd like to see the cranks before we make a deal. That is if you still need a stand. Get back to me and we'll hook up.

[danger!]

Hey Troy, I was actually going to call you and see if I can stop by tonight and check out the stand. I can bring the cranks with. Let me know if tonight works, or I'll call you later.

Thanks,
Dan

[aclg]

Buck, coming through again, thanks. I need to make sure I measure the monkey just right..can't be too carefull there....i know its 68 for shell, but the hussies im looking at come with a 118 so I will check it out.

ill get some photos soon, first i need to get the thing standing upright...kind of funky matte blue with retro flame graphics, and I just finished givin the bomber a clean coat of matte army green...its just enough to make someone think twice about yankin er from the bike racks...

thankz again - ac

Yes the hussfelts are ISIS and will work on the K2. The BB should fit no problem. Just order one for the shell size and spindle length you need. I'd go to www.truvativ.com (http://www.truvativ.com/) figure out exactly what you need. Lets see some pictures!!! You like hussfelts...pretty solid!
L8R
Buck

[Buck]

AC,

Some more help, the sizes you have measured are very common, The gigapipe and isis overdrive both come in 118 or 113 for spindle length in 68mm. Careful where you buy them though not all the places selling them will carry the Warranty, I know its on the site some where...I think price point is one of them.
L8R
Buck