PDA

View Full Version : Misc.Bike Parts For Sale


timmy
01-01-2005, 03:24 AM
(Used) 2003 Rock Shox Psylo XC U-Turn 80-125mm travel ( Gray)

HC2 damping system with external rebound knob
Oversized 30mm bushings & 30mm seals
1 1/8 in. CrMo steerer with 30mm Alum stanchions
pressed into an Aluminum (black) crown
Cast-Magnesium Q/R lower leg (Disc ONLY mounts)
Fork is in very good condition has some cable rub on crown. Steer tube is cut to approx. 7 1/2". Fork has xtra firm springs installed but is still very plush.
Price $125.00

(Used) 2000 Marzocchi Bomber Z-3 Bam 80 ( Red)

v-brake or disc compatible.
80mm travel 1 1/8 steer tube cut to approx. 7 1/2".
Has firm springs installed. I also have the stock springs and a 100mm travel upgrade kit, but I'm not sure if the travel upgrade kit is compatible with this fork?
Price $60.00

Brand new still in box SRAM X-Gen. Silver Front Derailleur.

9 speed (44-32-22)
High clamp, top or bottom pull, fits 28.6,31.8 or 34.9, Includes shim.
Price $40.00

Race Face 4 bolt bash ring (104mm BCD)
Price $10.00

(Used) Cat Eye Enduro 2 Cyclocomputer( Model CC-ED200).

7-Features: Heavy duty wire, Odometer set option, Programmable display, Dual tire size, Pacer (average +/-), Auto start/stop, Auto-power saving.

7-Functions: Dual trip distance, Current speed, Elapsed time,Total distance, Average speed, Maximum speed, Clock.
Price $20.00

(Used) 19 inch Kona "Fire Mountain" Steel HardTail Frame.

Frame has quite a few chips in the paint. No dent's or cracks. I think the frame is a '97? Also included with frame is a NEW FSA sealed cartridge bearing headset and a silver Kona seat post and clamp. Frame is not disc compatible! Both forks I am selling fit this frame!
Price $45.00

(Used) Hayes HMX-1 Mechanical Rear Disc Brake.

Includes: Caliper adapter, 6" rotor, 1 Hayes brake lever (black/silver) and bolts for caliper and rotor.This brake has less than 30 miles on it.
Price $30.00

Email me for pic's or more info at gwhawes@aol.com

SuperClydesdale
01-01-2005, 11:00 AM
Email me for pic's or more info at gwhawes@aol.com
Greg

I just emailed you about the frame and the Z-3.

Mark